Carriage bolts stainless steel M10 x 140 mm - 25 pieces

Are you going to build a wooden construction and are you looking for a solid fixation? Then use these stainless steel carriage bolts M10 x 140 carriage bolt. The A2 stainless steel quality ensures that the carriage bolts cannot oxidise, making them very suitable for use in damp areas. In addition, they have a tensile strength of 40 kg per mm2, which is due to the 4.6 steel quality. Use these M10 x 140 carriage bolt stainless steel carriage bolts to attach, for example, a 20 mm thick plank to a beam of 8 cm thick.

When using these carriage bolts, drill a hole in the wood that is 1 mm thicker than the fully threaded carriage bolt itself, in this case a hole of 11 mm in size. Use a hardwood drill 11mm for this. Then place the carriage bolt through the wood and tap it. As a result, the square part under the 24mm round head will clamp itself in the wood, so that the stainless steel carriage bolt will not turn when attaching the nut. Note: only use a rubber hammer when tapping, so that the carriage bolt is not damaged. To tighten the nut, use a 17 mm ring or open-ended spanner.

Carriage bolts stainless steel

Stainless steel carriage bolts are less strong than galvanised carriage bolts. The advantage of stainless steel is that this type of steel does not oxidise in a moist environment. M10 nuts are tightened by ring or open-end wrenches with a key width of 17 mm. In addition to our stainless steel carriage bolts, also see our very strong galvanised carriage bolts, or the beautiful-looking black carriage bolts.

Order the stainless steel m10 x 140 carriage bolt mm carriage bolts from Wovar. DIY and construction companies must sign up for a business account to take advantage of additional benefits such as discounts.

Is this carriage bolt not quite what you are looking for? View our entire range of stainless steel carriage bolts. In addition to stainless steel carriage bolts, Wovar also supplies carriage bolts galvanised and carriage bolts black.