Sliding Door System Stainless Steel - Straight with Rails 200 cm - Per Set

Looking for sliding door fittings that are suitable for both indoor and outdoor use? With Wovar's straight stainless steel sliding door system, in combination with wooden doors, you can create a beautiful look inside or outside the house. This sliding door set is made of stainless steel, so it does not rust. This makes it easy to use outside, for example at your garden house, log cabin or shed. The stainless steel rail is 200 cm long, making the set suitable for 1 door. 

Sliding door hardware set stainless steel

The sliding door kit contains all the supplies and mounting materials to install the sliding door hardware. This hardware kit includes:

• 2 interlocking stainless steel rails 100 cm (200 cm in total) 
• 2 stainless steel rollers, including 2 tap bolts, 2 cap nuts, and 2 washers per wheel
• 2 stainless steel door stops for on the rails 
• 2 spacers for between the rails and the door
• 1 floor guide to make door slide straight
• 5 stainless steel supports for between the wall and the rails
• 5 nylon plugs M10 x 50 mm
• 5 coach screws M8 x 90 mm
• Installation manual

You will need the following tools: a pencil, a masonry drill bit (stone and concrete walls) or hardwood drill bit (wooden walls), a 13 mm spanner, a spirit level, a Philips screwdriver, a tape measure, and a drill.

Are you going to use these to make outdoor sliding doors? Then you might also be interested in our gate hardware and garden products.

Installing a sliding door system

Below, you will find a concise step-by-step guide on how to install the sliding door system. For a more detailed explanation, please consult the supplied manual.

Step 1: Determine where you want the rails and mark the mounting holes with a pencil.
Step 2: Pre-drill the holes. In a hardwood wall, you can do this with a 5.5 mm hardwood drill bit and in a stone or concrete wall with a 10 mm masonry drill bit. 
Step 3: Fasten the rails to the wall with the steel supports in between. Remember to slide the two steel door stops with rubber bumper caps over the rails before attaching the outer two bolts. You will fasten these in the last step.
Step 4: Secure the door guide to the floor.
Step 5: Decide where on the door you want the rollers and mark the mounting holes with a pencil.
Step 6: Drill the holes in the door and fasten the rollers.
Step 7: Next, determine the best position for the spacers on top of the door and attach them.
Step 8: Carefully place the door on the rails.
Step 9: Slide the steel door stops to the desired position and fix them in this spot.

Buy a sliding door system stainless steel

Order this stainless steel sliding door system today and make your own unique sliding doors. Companies in the construction and landscaping industry enjoy many benefits with a business account, including a business discount.

Prefer a different style? Check out all our sliding door kits. Or browse our sliding door handles for more accessories.

Is this not quite what you are looking for? Explore our entire range of door and window hardware, where you will find, among others, flush bolts, coat hooks, cupboard handles, cabinet hinges, and draught excluders.