EPDM Alternative lead flashing 30 cm x 10 m

You are scheduling maintenance on your roof, sills and chimney and notice that the old lead no longer looks fresh. Of course you can replace it with new lead sheet, but lead is toxic, expensive and difficult to process. After searching on the internet, you will find the solution: lead flashing. This EPDM lead flashing is easy to install, lightweight, easily deformable, non-toxic and very easy to cut/cut to size. This makes it ideal for replacing old lead.

This EPDM alternative lead flashing is 30 cm wide, comes on a Roll of 10 metres and is Black in colour.

Advantages EPDM alternative lead flashing

In addition to being less prone to theft, UV-resistant and easier to install, alternative lead flashing has other advantages. The advantages of alternative lead flashing: 

• Light in weight, so easy to install;
• Available in complete rolls, reducing or eliminating the need for overlapping; 
• It is easily deformable; 
• Avoids lead streaks on your shingles, as sometimes happens with lead sheet; 
• No holes when striking or knocking in at high temperatures; 

Use instructions EPDM alternative lead flashing

The way of laying alternative lead flashing obviously varies from situation to situation, but the basics are the same. Before you start laying alternative lead flashing, first determine the amount and what type or colour lead flashing you need. Then make sure that the surface is free of grease, moisture and dust so that the alternative lead flashing has the best chance of adhering. When laying alternative lead flashing, adhere to the following steps: 

1. Apply the alternative lead flashing to the surface area and if necessary cut it to size, this can be done easily with scissors; 
2. Overlap the sections where necessary, keeping an overlap of at least 10 cm. Tip: on one section, fold the protruding piece inwards a bit and lay the other side over it. 
3. Press the alternative lead flashing well. This can be done with a pressure roller if necessary. We recommend using a pressing roller for the overlap parts anyway, as this strengthens the two parts better.
4. If the upper part falls on an upright wall, such as a chimney, finish the upper edge with a line of EPDM adhesives.
Last chance!

EPDM alternative lead flashing order

Don't hesitate any longer and order EPDM Lead Flashing today from Wovar. In doing so, customers benefit from good prices and excellent Quality. Are you an entrepreneur? Then create a business account now and enjoy great benefits such as a fixed business discount!

If this alternative lead flashing is not quite what you are looking for check out our category roofing materials for more roofing supplies.