Flathead Nails Galvanised - 2.3-2.5 x 40 mm - Roll 200 pieces

Would you like to quickly and easily install your cladding or gunwale boards using ring nails? With these flat-head roller nails 2.3-2.5 x 40 mm for air tackers, you will install cladding boards up to 18 mm thick in no time. Thanks to the Galvanised steel, these nails are extremely strong and will not break during installation. The head of this nail is 5.6 mm wide and ensures a good grip. The nails can also be removed from the Strip and can therefore also be used loose.

In addition to roll nails, these nails are also called flat head nails, facade nails and ring nails. The latter designation is due to the fact that the nails have a ringed pin. These small grooves fill up with wood after being placed and can hardly be removed from the wood afterwards. 

Placing Galvanised Rivets

The flathead ring nails are in rolls of 200 pieces. The Plastic band allows the nail to easily release when placed and will therefore not damage the wood. With threaded nails, however, there is a chance of damage. Wovar's flat head nails are on rolls at an angle of 15 degrees and are therefore suitable for virtually every tacker with a 15-degree magazine. 

Tip: Always make sure your tacker is set to the right air pressure. This will ensure that the staples do not shoot too deep into the Wood. Test whether the pressure is adjusted properly beforehand by taking a piece of leftover wood and shooting nails into it. Play with the pressure of the tacker until the nails are in the wood at your desired depth.

Ordering Flat ring nails

Order your roll of round head nails today for the lowest price at Wovar! Companies active in the construction or handyman industry also benefit from additional advantages when creating a business account. 

Don't these flathead roll nails quite suit your job? Then take a look at all our other flat head nails. In addition to rolling nails, we also supply cladding screws and garden screws if you prefer to do the job without a tacker.