Stainless Steel 165 cm Flex Fence Louver Frames for the Garden - 2-Piece Set

Looking for louvered frames to create a unique fence or pergola? With these flex fence louver frames 165 cm, you can adjust the wall or fence panel at any time. Open them to allow more sunlight, or close them to create shade and keep out the wind. This set consists of 2 stainless steel rails with a length of 165 cm. It also includes the fasteners required to fasten the rails. The rails hold a maximum of 14 boards and can be installed both horizontally and vertically. Note: the boards are not included in the set. You will have to order these separately.

The supports each contain 2 mounting holes. We recommend adding galvanised screws 3.5 x 16 mm to your order, as these screws are not included in the set. When working with hardwood, we recommend drilling pilot holes with a hardwood drill bit. This prevents the wood from being damaged, and the screws from getting stuck. The wood will expand and shrink due to the weather, so it is important not to tighten the screws too much.

Note: On arrival, the rails may seem to be a little loose. This is because you can decide yourself how difficult you want the opening and closing of the slats to be. You can do this by tightening the locknut in the U-profile of the Flex Fence with a pipe wrench. The tighter you fasten the nut, the harder it is to adjust the frame. Do this before installing the boards, as they will block access to the locknut.

Installing flex fence louver frames

Wovar's flex fence louver frames are incredibly versatile. For example, you can install the rails both horizontally and vertically. Louvered shutters or shades, a wind screen, or louvered fence panels, the possibilities are endless. You can even create a louvered pergola roof or gazebo wall.

Boards for these louver frames should not be longer than 180 cm. Examples of what kind of boards you can use are impregnated pine wood or smooth planed hardwood fence boards. Suitable boards for a flex fence louver frame are approximately 1.6 - 1.8 cm thick and 14 - 14.5 cm wide.

If the rails are too long for the project you have in mind, easily shorten them to the desired length with a hacksaw. If they are too short, you can simply combine them with another flex fence rail to get to the right height. 

Note: Slight corrosion on the stainless steel may be visible due to the tannic acid in certain types of wood, but you can just wipe it off. We tested the rails extensively, including with a salt spray test. Coastal places could strengthen this effect, but the spots can still easily be wiped off. This does not influence the strength or look of the rails.

In the video below, we explain how to install a Flex Fence louver system. 

Buy flex fence louver systems

Are these exactly the flex fence louver frames you have been looking for? Then order your set quickly and get started with your shutters, gazebo, or fence. Business clients, such as construction and landscaping companies, can create a business account. This allows you to benefit from, for example, a business discount and access to a detailed order history. 

Prefer a different colour? Have a look at our white flex fences or black flex fences.

Do you still require some tools to be able to install these louvered frames? Take a look at our bits and measuring tools, or explore our entire range of tools.