Gate Fittings for Garden Fence with Hinges With Bend Blue

This gate fitting set is equipped with 2 modern blue galvanised hinges of 65 cm with bend. With thicker support posts, your door will fall nicely in the middle of the support post through the bend. In addition to the hinges, this set also includes 2 galvanised hinge hooks, 1 fence lock, 6 M8x30mm lag screws galvanised, 2 carriage bolts M8x60mm galvanised, a hardwood drill 6mm and a hardwood drill bit of 9 mm thick.

Install gate hardware set for garden fences

Before you start, it is important to note that you will also need 12 stainless steel 4x50mm garden screws and 6 stainless steel 4x30mm garden screws, as they are not included in this set.

To mount this hardware on your garden gate, use the supplied lag screws. There are 3 round holes and 1 square hole in the blue galvanised 65 cm strap hinges. Use the lag screws for the round holes and the supplied carriage bolts for the square hole.

Use the 6mm thick hardwood drill bit to pre-drill the lag screws. Note: do not drill all the way through the garden fence. 2 cm pre-drilling is enough. With the 9 mm thick hardwood drill bit, you can drill right through the garden fence. You do this at the place of the square hole of the strap hinge. This is because the carriage bolt is passed through. With the 12 stainless steel 410 garden screws 4x50 mm you can securely fix the hinge hooks. You should use the 6 stainless steel 410 garden screws 4x30 mm to mount the gate lock.

* if the garden gate lock is not in stock, a farmer's gate latch set is included.

To order

Order this gate hardware set for garden fences at Wovar for the lowest price. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this gate fitting set not quite what you are looking for? View all our gate hardware sets here. Would you rather put together a gate fitting set yourself? View our entire range of hinges and hooks here.