Hammer Fixings 5 x 50 mm - Per 200 Pieces

Do you want to anchor a wooden slat or batten to a wall? With the high-quality 5 x 50 mm hammer fixings from Wovar, that is done in no time. hammer fixings are a lighter variant of our stronger frame plugs and are mainly used when attaching light battens to a wall. Installation using our hammer fixings is lightning fast.

Attaching a hammer fixing

You first drill a hole in the wooden slat or batten. You can do this with a 5mm hardwood drill. Continue the process by placing the slat in the desired location and mark the wall with an SDS-plus hammer drill 5x110. Drill the hole 45 mm deep so that the hammer fixing enters the wall completely through the slat. The 5 x 50 hammer fixing has a length of 50 mm. It is possible to attach a slat with a maximum thickness of 5 mm.

Then push the hammer  fixing through the wood into the wall. Then hammer in the fixing using a rubber mallet. Now your slat or batten is firmly attached to the wall. If you want to remove the slat, you can easily do that thanks to the PZ-2 (pozidrive) drive.

Want to order hammer fixings 5x50 mm?

The hammer fixings 5x50 mm are offered per 10 pieces. With an order of 20 sets you already benefit from a volume discount. Construction, DIY and landscaping companies receive extra benefits with a business account, such as a discount.

Is this hammer fixing not quite what you are looking for? View our entire range of hammer fixings. Wovar also supplies nylon plugs separately.