Joist Hanger Heavy Galvanised for 8 x 18 cm Beams - Each

This very strong galvanised steel joist hanger is suitable for mounting 8 x 18 cm beams. This joist hanger with the factory name joist hanger 440 x 80 mm has a CE mark. As a result, our joist hangers meet the legal requirements in the field of safety, environment and health.

The rave carrier has 55 handy screw holes. You can use our galvanised chipboard screws with torx drive 4x40 mm for this. For an extra strong anchoring, we recommend also screwing in a 5 x 70 mm screw on the underside of the joist hanger.

What is the carrying capacity of this joist hanger?

The load capacity of this Wovar joist hanger is shown in the table below. In the image on the right you can see which abbreviation belongs to which wearing direction. For example, DR stands for the bearing capacity downwards, DW for the lateral strength and T for the force of the beam or wall. As you can see, the load capacity is higher when you use screws. The load-bearing capacity has been tested with a total of 44 galvanised screws 5 x 35 mm. It is recommended to use a minimum of 4.0 mm screws. The load-bearing capacity for fastening with nails has been tested 4x40 mm threaded nails 44 pcs.

The load capacity shown in the table applies to T-joints wood to wood. For fastening with screws, it is recommended to use a minimum of 4.0 mm screws *

Buy joist hangers for 8 x 18 cm beams

Order the joist hangers 440 x 80 mm for the lowest price at Wovar. Do not forget to order our very strong chipboard screws torx galvanised to mount the joist hangers. Green and construction companies, such as DIY companies, construction companies and gardeners, receive extra benefits at Wovar, such as discounts with a business account.

Is this joist holder not quite what you are looking for? View our entire range of joist hangers or beam supports here. Are you building a canopy? Also check out our strong wood construction screws.