Metal roofing screws Galvanised with cap 7 x 110 mm - Per Piece

These high-quality metal roofing screws are also referred to as corrugated sheet bolts. This metal roofing screw has a modern black cap. This provides a beautiful finish to your corrugated sheet roof. These screws are suitable for corrugated sheets with a maximum wave height of 85 mm. By maintaining a minimum adhesion of 25 mm in the wood, you are assured of a strong attachment.

Screws for corrugated metal sheets

These metal roofing screws with cap are made of galvanised steel and therefore very strong. Galvanised steel can oxidise after damage. Try to prevent this as much as possible from damaging the metal roofing screws by always using the correct wrench size. Wrench size 11 is part of these 7x110 mm corrugated screws.

These metal roofing screws with black cap are only suitable for mounting corrugated sheets on wood. Pre-drilling in the corrugated sheets is necessary with a slightly thicker drill than the screw. Our 8 mm thick metal drills are suitable for this. Pre-drilling in soft woods is not necessary. When attaching the corrugated sheets to hardwood, pre-drilling is recommended. Pay attention; if you want to predrill hardwood, it is important that you use a smaller drill bit than the thickness of the screw. If you use a drill that is too thick, the screw will not adhere properly to the wood. Our 5 mm thick hardwood drill bits are suitable for this.

To properly fix your metal roofing screws, screw a metal roofing screw at the top and bottom of the corrugated sheets in each wave. In between, a metal roofing screw every 3 wave heights is sufficient.

Buy metal roofing screws

Order the metal roofing screws with cap per piece. Wovar offers high quality for an affordable price. Gardeners, Construction, and DIY companies get extra benefits with a business account such as discounts.

Are these metal roofing screws not quite what you are looking for? View our entire range of metal roofing screws. See also our stainless steel metal roofing screws or standard roofing screws.