Pointed pole anchor Black Coated 15.1 x 15.1 x 90 cm - Per Piece

Are you looking for a stylish black pole anchor for 15 x 15 cm beams or posts? These pole anchors have a luxurious black powder coating and are provided with a sturdy point. This pole tip has a total size of 15.1 x 15.1 x 90 cm and is made of galvanised steel, the length of the tip is 75 cm.

Mount pole anchor 15 x 15 black

To place the post tip, dig a hole of 40 x 40 cm and approximately 70 cm deep. Drive the pole anchor into the ground using a piece of scrap wood in the pole anchor, this will affect the black powder coating less quickly. You can use quick cement for an extra sturdy installation. Make sure that the head of the pole anchor is a few mm above the ground.

The 15 x 15 cm post or beam should be placed approximately 3-4 mm from the bottom, allowing water to flow out through the holes in the post tip. This will make your pole less likely to rot at the bottom. For mounting the post you can use our M8 x 60 mm black lag screws, then order our Washers Black M8. These rings will damage the coating of the pile tip less quickly. Pre-drill these lag screws with 6.0mm hardwood drill bit.

Is there a chance that your construction will catch a lot of wind? These pole anchors could bend or deform in strong gusts of wind, so a post in the ground is always stronger. When using these pole anchors, you can attach a batten to the post to make a triangular construction. This construction provides extra strength.

Order pole anchor with point Black Coated 15.1 x 15.1 x 90 cm

Wovar sells this black pole tip for the lowest price per piece. In addition, take advantage of a high volume discount with a purchase of at least 10 items. Companies in the construction, DIY and landscaping sector also benefit from additional benefits with a business account.

Is this pole anchor black not quite what you are looking for? View our entire range of pole anchors or pole anchors pointed here. We also offer handy pergola connectors for making pergolas.