Roof edge trims Bead Ø26 mm Aluminium Coupler - Per Piece

Connect several lengths of your roof edge trims round easily with a connector or simply connect the outside corners and inside corners. This connector has a length of approximately 8 cm. This way, you will also get a maximally strong whole for the roof of your log cabin or Roofs. 

Self-tapping screws stainless steel Waterproof

To properly secure the Set with all roof edge trims, use Wovar Waterproof self-tapping screws stainless steel. This will ensure a tight and Waterproof whole. The head of these screws is self-drilling, so it will easily penetrate the aluminium sheet metal. Then the round head with washer ensures that the hole is sealed Waterproof again when you tighten the screw. 

Installing roof edge trims round Aluminium

Mounting the roof edge trims round Aluminium is easier than you think. First determine the place where the roof edge trims with bead should be placed. Lay the aluminium bead trim round and make sure you fix the trim in the roof in at least two places. Finally, place the connectors and complete the job.

Tip: Pre-drill carefully with a 3 mm hardwood drill bits into the roof edge trims to prevent possible damage to the roof trim. Place the Waterproof self-tapping screws stainless steel on the trim and tighten firmly. Put the rest of the roof edge trims in place as well and perform the same steps. For neat assembly, use the connectors, these ensure that the overflow to the other roof edge trim falls perfectly. 

Order connecting piece Roof edge trims round Aluminium 26 mm

Order these connecting pieces for roof edge trims bead at Wovar. In addition to bead trims round, we also offer straight roof edge trims. 

Please order these connectors for roof edge trims round.