Slide bearing hinge SKG 3 Star 89 x 89 mm with Round Corner Galvanised - Per Piece

The Slide bearing hinges with SKG*** CE Certificate from Wovar are top performers among security hinges! These hinges have a higher load-bearing capacity, are maintenance-free, corrosion-resistant, a sleek design and, to top it all off, a thief's claw.

Last chance!

Security hinges with slide bearing 89 x 89 mm

This security hinge is 89 mm long and wide and has round corners. In addition, this steel hinge has a Blank Galvanised HPCE coating, making it highly resistant to rust and corrosion. 

In addition, this steel hinge has a Galvanised HPCE coating, making it highly resistant to rust and corrosion.

This hinge has a load capacity of no less than 145 kg per 3 pieces! This means you only need two of these Hinges to hang a door weighing 100 kg.

Last chance!

Further, this hinge features a nylon-layered knurled pin. This ensures that the pin does not rise. For best results, we therefore recommend using our chipboard screws 410 stainless steel 4 x 50 mm. In addition, you need to drill a hole for the thief's claw. For this, you will need a 16 mm butterfly drill bit. Drill this hole about 20 mm deep. 

In addition, you will need to make a recess for the Hinge to work properly. You do this by drawing an outline of the Hinge at the place where you are going to install it. Then use a hammer and chisel to make a 3 mm deep recess for the Hinge to sink into. Need another hammer or chisel? You can find these in the hand tools category under woodworking.

Tip:To make a cutout use our router jigs for Hinges for the quickest and best results.

These can be found in our router jigs category.

.

Is your window frame or door made of Hardwood? Then we recommend slightly pre-drilling the holes. This will prevent possible splitting of the wood and the screws will easily turn away.

Use a 2.5 mm hardwood drill bits and do not drill the holes deeper than 10 mm.

This way, you will prevent splitting of the wood and the screws will easily turn away.

Using a 2.5 mm hardwood drill bits and do not drill the holes deeper than 10 mm.

The diagram below shows how many and how to install the Hinges to comply with SKG classification. Keep in mind that the bottom two screws must be screwed into the frame at an angle in case of an inward-swinging door. 

The door in the photo example is a Standard door measuring 2325 x 930 mm.

Slide bearing hinge 89 x 89 mm with SKG CE Certificate order

Order this competitively priced Slide bearing hinge of SKG*** quality mark today from Wovar. Are you a landscaper or do you have a construction or handyman business? Then become a business customer with us! In fact, when you sign up for a business account you will enjoy additional benefits, such as a fixed discount and your own contact person! 

Is a security hinges not quite what you are looking for? Then take a look at our full range of Hinges. Besides security hinges we also supply standard hinges, paumelle hinges, double action spring hinges, louvered door hinges, backflap hinges, piano hinges and black hinges.

In addition to security hinges, we also supply standard hinges, paumelle hinges, double action spring hinges, louvered door hinges, piano hinges and black hinges.