Steel Corner Swing Set Bracket for 7 x 7 cm to 10 x 10 cm posts - Per Piece

With the Steel Corner Swing Set Bracket for 7 x 7 cm to 10 x 10 cm posts from Wovar , you can build a swing from square posts. This steel corner connection is suitable for square beams from 70 x 70 mm to 100 x 100 mm for the uprights, square beams from 90 x 90 mm to 125 x 125 mm can be used for the top beam. A swing corner joint is also known as swing support, swing joint, or corner element. This connection is powder-coated green.

Assembling a Swing Corner Bracket

To assemble a swing, you can use our very strong M10 Galvanised lag screws, make sure that the screw is approximately 75% in the wood. To drill this wood screw straight into the wood, you can pre-drill with an 8 mm hardwood drill. The swing corner joint square has 12 holes in which an M10 coach screw can be sunk to mount the swing. For extra strength and a higher clamping range, use an M10 washer.

The swing joints for 7 x 7 cm to 10 x 10 cm posts Steel corner piece - Each is tested and approved according to the most recent European directives and regulations.

Ordering your Swing Corner Bracket

Order Square swing set bracket for 7 x 7 cm to 10 x 10 cm posts. Each to build a beautiful swing with square poles. You need two connections for a swing. Gardeners and construction companies benefit from additional benefits such as a discount with a business account.

Want to make a swing with round posts? Take a look at all our swing set brackets. Mount this swing set bracket with our M10 coach screws.