Threaded inserts M6 x 15 mm Galvanised - 20 Pieces

If you are looking for a screw-in nut with which to install castors under a cabinet, for example, they are easy to use and, when used properly, invisible to the eye. The Wovar threaded inserts M6 are made of steel that is then galvanised. This makes them very strong, but still suitable for outdoor use. This screw-in nut is suitable for bolts with a width of 6 mm. This nut has a nominal length of 15mm. 

What is a ramp nut?

A ramp nut is a nut with a hollow inside threaded insert. The screw thread in the nut allows it to secure socket head bolts or other threaded bolts. There is also threaded inserts on the outside of the ramp nut. This thread is there to securely fasten the ramp nut into Wood or other Materials.

How does a ramp nut work?

A ramp nut also known as a screw-in nut is often used when attaching furniture casters to tables or chairs. The screw-in nut allows you to make a bolted connection on Wood or other Materials. In the hollow part of the nut you can attach an Allen nut.

How do I secure a threaded inserts?

• Pre-drill the fixing location with a 9 mm drill
• Place the rampa drill on the hole and tighten it with a screwdriver
• Turn the bolt into the nut and it is finished

Tip: If screwing in with a screwdriver is difficult, you can try the method below.

• Do a washer on a socket head screw and screw it into the threaded inserts until it is tight
• Then use a drill to drill into the fastening surface

Order threaded inserts M6 Galvanised

Do you want to order threaded inserts M6 Galvanised? You can do so at Wovar! Are you already using a business account? No, then don't wait any longer and take advantage of our business discount.