CURRENT LOCALE en-gb

4.7 stars out of over 2000 reviews
  • Ordered before 12:00, delivered within 3-4 days
  • 30-day return policy
  • Secure payment
Vapour barriers 90g/m2 - 1.50 x 50 metresVapour barriersDamp Proofing

Vapour barriers 90g/m2 - 1.50 x 50 metres

Dampdichtefolie150m
Dampdichtefolie250m
Dampdichtefolie150m
Dampdichtefolie250m
£81.99
£66.66 excl. VAT
Item
20 items in stock
Ordered before 12:00, delivered within 3-4 days
More affordable than hardware stores
High-quality products at competitive prices

Why choose Vapour barriers 90g/m2 - 1.50 x 50 metres?

  • High sd-value (35) and thus very vapour-tight
  • CE Certificate
  • Broadly applicable
  • Suitable for both hard and soft surfaces

    Vapour barriers 90g/m2 - 1.50 x 50 metres

    Vapour barrier foil 90g/m2 - 1.50 x 50 Meter

    When insulating your facade or roof, ventilation must be taken into account and a good foil is important. With closed facades and roofs you should therefore apply a suitable vapour barrier (better known as vapour barrier) foil on the inside. This foil prevents water vapour from condensing and penetrating the insulation. This is why a good vapour barrier foil also has a high sd-value (vapour resistance) which is a unit of measurement for how well the foil retains moisture.

    Our foil has a thickness of approximately 90 Grams/m2 and, unlike most other foils on the market, it is fully CE approved. This means that the foil's performance has been independently tested and conforms to performance standards. The foil comes in rolls of 150 cm wide and 50 metres long and is easy to cut to size with a Snap-off knife. 

    Instructions vapour control foil

    First of all, apply foil tape to the wooden battens on the inside of the wall, this will prevent the acids in the Wood from migrating into the foil and affecting the foil. Then apply  the film from left to straight, with the top side (this is always the colour side with our spider web film) at the top. Always start at the bottom. Secure the foil with Stainless steel staples with a minimum length of 25 mm. Shoot staples every 250 mm. This prevents weather influences (wind) from pulling the foil loose. Our advice is always to secure the foil with staples; glue alone is not sufficient and can lead to complaints. For the overlap, use foil glue from a tube. Always work seams and staples with our special vapour-proof tape for best results.  Always ensure 100 â€" 150 mm overlap. Use a useful Snap-off knife to cut the foil to size.

    Dampour barriers order

    Order Wovar Vapour barriers for closed roof and building supplies. Construction companies, landscapers and handymen benefit from extra discounts with a business account.

    Is this foil not quite what you are looking for? Then check out our Other foils.

    £81.99
    £66.66 excl. VAT
    Item
    20 items in stock
    Ordered before 12:00, delivered within 3-4 days
    More affordable than hardware stores
    High-quality products at competitive prices
    The premium brand for all your screws, bolts, and other hardware
    More affordable than hardware stores
    Fast delivery throughout Europe