Wood filler Spruce/Green Tube 50 ml Wood filler

Are you looking for a ready-to-use wood filler to fill your light wood? Then look no further. This is because Frencken's wood fillers, also known as kneadable wood, are used by the better professionals for several reasons. For instance, Frencken's kneadable Wood fillers are known for quick drying and minimal shrinkage. Because of its good Quality, the product is often used on parquet floors and panelling indoors. Exterior wood fillers are also widely used. We recommend finishing with a good stain or varnish. The Wood filler is paintable with both water-based and turpentine-based paints.

Colours of Frencken's Wood filler

The Wood filler is available in different colours. You are currently looking at the Popular colour Pine. This is actually the most commonly used colour for Softwood. Think Larch, Douglas fir, pine etc. When you use Wood filler Exterior, the product will grey out with the wood, unless you apply a protective stain or paint against UV light. Besides this tube of 50 millilitres, we also sell the same colour in cans of 125 ml. 

Using mouldable wood filler

Before using Kneadable Wood filler, it is first important to prepare the surface material. It should be dry, dust-free and grease-free. If necessary, clean it first with, for example, a wood cleaner. Then use a spatula or putty knife to apply the Wood filler in one or more layers, depending on the size of the Surface area to be filled. Remove wet residues as soon as possible with a dry cloth. Cured residues can be removed mechanically. After 10 hours the surface can be painted over. 

Properties of Wood filler

• Base: cellulose nitrate
• Solids: approx. 40% Specific gravity (20 °C): approx. 0.9 g/cm³
• Viscosity: pasty
• Min processing temperature: 10 °C
• Wet colour: Pine/spruce
• Colour dry: Pine / spruce
• Smell: solvent smell
• Number of components: 1
• Temperature resistance: approx. â€"20 °C to +70 °C
• Moisture resistance: fair (repaint for outdoor use)
• Solid dry after: 20 to 30 minutes
• Sanding and recoatable after: approx. 10 hours
• Use: depending on layer thickness

Attention! The above values are determined at 20 °C/65% RH and a wood humidity of 10%. Deviating conditions will result in different values.