Zinc Plated Hanger Bolt of M8 x 80 mm with SW6 Center Hex Drive - Box of 100 Pieces

Are you looking for hanger bolts? Wovar delivers zinc-plated and stainless steel bolts quickly to your home. A hanger bolt, or dowel screw, is a steel rod with a wood screw thread on one side and metric thread on the other. Wovar hanger bolts are made of zinc-plated steel and are available in various thickness sizes and lengths. This hanger bolt has an M8 width and length of 80 mm. You can screw this hanger bolt into the wood using a Torx bit. This hanger bolt, however, also comes with an SW6 center hex drive, which allows you to tighten the hanger bolt more firmly with a spanner because you can apply more force. The hex drive is always 2 mm smaller than the indicated thickness of the rod end, so the hex drive for this M8 hanger bolts must be tightened with a 6 mm open-end wrench. Then you can screw a nut on the metric thread.

For heavier constructions and indoor jobs, these zinc-plated hanger bolts are almost always used. This is because they are stronger than stainless steel studs. You can screw your hanger bolts into the wood using a cordless drill. You need a Torx bit for this. You can screw on this M8 hanger bolt with a TX25 bit. Do you want to screw hanger bolts into hardwood? Then we recommend using our hardwood drill bits to pre-drill the wood. You can determine the correct thickness of the hardwood drill bit by subtracting 2 mm from the thickness of the hanger bolt. So with this M8 hanger bolt, you would use a 6.0 mm thick hardwood drill bit. 

It is also possible to anchor the hanger bolts in a stone wall. There, you should combine the hanger bolt with one of our nylon plugs. This allows you to install railings quickly and easily, for example. For M8 hanger bolts, use a nylon plug that's 12 mm thick. You can always drill a hole in the wall using our hammer drill or concrete drill bits that have the same diameter as the plug. So for a 12 mm thick plug, you should also use a 12 mm thick hammer drill. 

Ordering your M8 x 80 mm Zinc Plated Hanger Bolts with SW6 Center Hex Drive

Order your zinc-plated M8 x 80 mm hanger bolts with an SW6 center hex drive from Wovar for the lowest price. These Wovar hanger bolts are offered per box of 100 pieces, with a volume discount starting with 5 boxes. Construction companies, Handyman companies, gardeners, and timber merchants benefit from extra benefits with a business account such as an extra discount.

Are these zinc-plated M8 x 80 mm hanger bolts with an SW6 center hex drive not what you are looking for? Then, check out all our Hanger Bolts. In addition to hanger bolts, Wovar also supplies carriage bolts, coach screws, and garden screws at lightning speed from our own inventory.